오디오 인터페이스 - Focusrite Scarlett 2i2

Focusrite Scarlett 2i2

• The Scarlett 2i2 is a 2 in / 2 out USB recording interface featuring two award-winning Focusrite preamps. Housed in an attractive anodised aluminium unibody chassis, the interface not only sounds fantastic but looks great too. What’s more it’s solid enough to take on the road when you travel. The Scarlett 2i2 is much more than just a pretty metal box...
  

• ---

• 25 Years of experience
  For more than 25 years, Focusrite has designed some of the most popular microphone preamps in the industry. This experience has been used to create the transparent, low-noise and low-distortion preamp found not only in the Scarlett 2i2 but also our flagship Firewire interface, the Liquid Saffire 56. Plenty of available headroom makes it suitable for moving coil, condenser and ribbon microphones regardless of the source. Phantom power is provided for mics that need it.

• ---

• Plug straight in
  The front panel Neutrik combination input can be used to connect line and instrument level signals as well as microphones. This makes it perfect for recording the output of a synthesizer or stage piano, whilst at the flick of a switch you can cater for the output of an electric or acoustic guitar.

• ---

• Keep an eye on your levels
  Unique halo signal indicators let you know that you’ve got a good signal level for recording. Red means that your signal is clipping, and that you should reduce the gain. The halo will momentarily turn amber as the level returns to a healthy level, at which point it will turn green.

• ---

• Flexible monitoring options
  A large monitor dial provides a tactile control for the volume of your speakers, whilst a high quality headphone amp provides a clean yet loud signal to headphones connected to the front panel socket. The direct monitor switch routes audio directly from the inputs to both the headphone and speaker outputs. This allows you to monitor the incoming signal with zero-latency.

• ---

• Polish your mix
  The included Scarlett Plug-In suite provides effects compatible with all major DAWs; so whether you're using GarageBand, Pro Tools 9, Cubase, Logic or the included Ableton Live Lite, Scarlett 2i2 is the complete package for you to get recording straight away.



Specifications

2 in / 2 out USB audio interface
96 KHz, 24-bit conversion
2 Focusrite microphone preamplifiers
Red anodised aluminium unibody chassis

Front panel:
2 line/mic/instrument combination inputs – Neutrik XLR/¼” TRS Jack Combo
2 Line/Instrument switches
2 Gain knobs
2 Gain halo signal indicators
48V Phantom power switch
Direct monitor switch
Large monitor level dial
USB Connection LED indicator
Headphone output - ¼” TRS Jack
Headphone level knob

Rear panel:
2 balanced monitor outputs – ¼” TRS Jack
USB 2.0 Port
Kensington Lock slot

Included software:
Ableton Live Lite 8
Focusrite Scarlett plug-in suite

Analogue Input Performance
Mic
Frequency Response	20Hz - 20kHz +/- 0.1 dB
THD+N	< 0.002% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
Equivalent Input Noise (EIN)	< -120dB: measured at 55dB of gain with 150Ω termination (20Hz/22kHz bandpass filter)
Gain Range	+10dB to +55dB
Max Input Level	-3dBu
Line
Frequency Response	20Hz - 20kHz +/- 0.1dB
THD+N	< 0.002% (measured with -1dBFS input and 22Hz/22kHz bandpass filter)
Noise	-90 dBu (22 Hz/22KHz bandpass filter)
Signal to Noise Ratio	> 100dB
Gain Range	-10dB to +35dB
Max Input Level	+20dBu
Instrument
Frequency Response	20Hz - 20kHz +/- 0.1dB
THD+N	0.005% (measured with -8dBu input and 22Hz/22kHz bandpass filter)
Noise	-87dBu (22Hz/22kHz bandpass filter)
Gain Range	+10dB to +55dB
Max Input Level	-3dBu
Analogue Output Performance
Nominal Output Level	0dBFS = 10dBu, balanced
Frequency Response	20Hz - 20kHz +/- 0.2dB
THD+N	< 0.001% (measured with 0dBFS input 22Hz/22kHz bandpass filter, un-weighted)
Output Impedance	< 10Ω
Power Output into 150Ω	15mW
Power Output into 50Ω	30mW
Digital Performance
Clock sources	Internal clock only
A-D Dynamic Range	105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB
D-A Dynamic Range	104dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB
Supported sample rates	44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz
Crosstalk
Input to Input	Better than 90dB
Output to Output	Better than 90dB
Input to Output	Better than 85dB
Input Metering
Ring LED lit Green	Signal present (-24 dBFS)
Ring LED lit Red	Signal overload (0dBFS), peak held for approximately 1 second
Weight and Dimensions
Height	45 mm / 1 ¾ “
Width	175 mm / 7”
Depth	100 mm / 4”
Weight	580 g / 1.3 lbs

System Requirements

Mac:
OS X 10.6.5 Snow Leopard (32 and 64 bit) and above, including OS X 10.7 Lion

Windows:
Windows 7 (32 and 64 bit), or Windows XP SP3 (32 bit only)
Windows Vista is not officially supported